MLS_L2_H2O
Variables
The table below lists the variables that are present in the HARP product that results from an ingestion of MLS_L2_H2O data.
field name  | 
type  | 
dimensions  | 
unit  | 
description  | 
|---|---|---|---|---|
datetime  | 
double  | 
{time}  | 
[seconds since 2000-01-01]  | 
time of the measurement  | 
longitude  | 
double  | 
{time}  | 
[degree_east]  | 
tangent longitude  | 
latitude  | 
double  | 
{time}  | 
[degree_north]  | 
tangent latitude  | 
pressure  | 
double  | 
{vertical}  | 
[hPa]  | 
pressure per profile level  | 
H2O_volume_mixing_ratio  | 
double  | 
{time, vertical}  | 
[ppv]  | 
H2O volume mixing ratio  | 
H2O_volume_mixing_ratio_uncertainty  | 
double  | 
{time, vertical}  | 
[ppv]  | 
uncertainty of the H2O volume mixing ratio  | 
H2O_volume_mixing_ratio_validity  | 
int32  | 
{time, vertical}  | 
quality flag for the H2O volume mixing ratio  | 
|
index  | 
int32  | 
{time}  | 
zero-based index of the sample within the source product  | 
Mapping description
Bits 4 to 9 and 11 to 14 in the quality flag denote a specific error condition while bits 0 to 2 denote the severity (bit 0 error, bit 1 warning, bit 2 comment).
Bits 4 to 9 denote the MLS status (bit 4 HICLOUD, bit 5 LOWCLOUD, bit 6 NO_APRIORI_T, bit 7 NUM_ERROR, bit 8 TOO_FEW_RAD, bit 9 GLOB_FAILURE).
Bits 11 to 14 denote specific checks as specified in the EOS MLS data quality document (the pressure range, quality and convergence thresholds come from table 1.1.1 in issue 4.x-4.0 of that document): Bit 11 denotes pressure out of range, bit 12 denotes quality below threshold, bit 13 denotes convergence above threshold and bit 14 denotes a negative precision. Also, if any of the bits 11 to 14 is set, bit 0 is automatically set.
The table below details where and how each variable was retrieved from the input product.
field name  | 
mapping description  | 
|
|---|---|---|
datetime  | 
path  | 
/HDFEOS/SWATHS/H2O/Geolocation_Fields/Time[]  | 
description  | 
the time converted from TAI93 to seconds since 2000-01-01T00:00:00  | 
|
longitude  | 
path  | 
/HDFEOS/SWATHS/H2O/Geolocation_Fields/Longitude[]  | 
latitude  | 
path  | 
/HDFEOS/SWATHS/H2O/Geolocation_Fields/Latitude[]  | 
pressure  | 
path  | 
/HDFEOS/SWATHS/H2O/Geolocation_Fields/Pressure[]  | 
H2O_volume_mixing_ratio  | 
path  | 
/HDFEOS/SWATHS/H2O/Data_Fields/L2gpValue[]  | 
H2O_volume_mixing_ratio_uncertainty  | 
path  | 
/HDFEOS/SWATHS/H2O/Data_Fields/L2gpPrecision[]  | 
H2O_volume_mixing_ratio_validity  | 
path  | 
/HDFEOS/SWATHS/H2O/Data_Fields/Status[], /HDFEOS/SWATHS/H2O/Data_Fields/Quality[], /HDFEOS/SWATHS/H2O/Data_Fields/Convergence[], /HDFEOS/SWATHS/H2O/Data_Fields/L2gpPrecision[], /HDFEOS/SWATHS/H2O/Geolocation_Fields/Pressure[]  | 
description  | 
see generic mapping description  | 
|