| id | field name | definition |
|---|
| 0 | mph |
| ascii record "" | size: 1247 |
|---|
|
| 1 | sph |
|
| 2 | dsd |
|
| 3 | configuration_file_creation_time |
| binary time | size: 12 |
|---|
Configuration file creation time
unit: "s since 2000-01-01"
value: float(./days) * 86400 + float(./seconds) + float(./microseconds) / 1000000
| binary record | size: 12 |
|---|
ENVISAT binary datetime
| id | field name | definition |
|---|
| 0 | days |
| binary int32 | size: 4 |
|---|
days since January 1st, 2000 (may be negative)
unit: "days since 2000-01-01"
|
|
| 1 | seconds |
| binary uint32 | size: 4 |
|---|
seconds since start of day
unit: "s"
|
|
| 2 | microseconds |
| binary uint32 | size: 4 |
|---|
microseconds since start of second
unit: "1e-6 s"
|
|
|
|
|
| 4 | dsr_length |
| binary uint32 | size: 4 |
|---|
|
Length of DSR in bytes
|
|
| 5 | spare_1 |
hidden: true
|
| 6 | if_filter_mask_correction_flag |
| binary uint8 | size: 1 |
|---|
|
Flag for selection of specific IF filter mask correction processing 0
|
|
| 7 | specific_uso_calibration_flag |
| binary uint8 | size: 1 |
|---|
|
Flag for selection of specific USO calibration value
|
|
| 8 | rx_delay_test_reference_value |
| binary array[2] | size: 8 |
|---|
Reference values for computed RX delay text
| binary int32 | size: 4 |
|---|
|
unit: "us"
|
|
|
| 9 | agc_test_reference_value |
| binary array[2] | size: 8 |
|---|
Reference values for AGC test
| binary int32 | size: 4 |
|---|
|
unit: "1e-2 dB"
|
|
|
| 10 | zero_padding_factor |
| binary int32 | size: 4 |
|---|
|
Zero padding factor for PTR evaluation
|
|
| 11 | ptr_shift_test_reference_value |
| binary array[2] | size: 8 |
|---|
Reference values for PTR shift test (unit: 1e-2 FFT filter units)
|
|
| 12 | ptr_power_test_reference_value |
| binary array[2] | size: 8 |
|---|
Reference values for PTR power test
| binary int32 | size: 4 |
|---|
|
unit: "1e-2 dB"
|
|
|
| 13 | max_ptr_measurements_fly_cal_corr_ku |
| binary uint32 | size: 4 |
|---|
|
Maximum number of measures derived from single PTR measurements to be averaged to get Fligt Calibration Correction Parameters for the Ku band
|
|
| 14 | max_ptr_measurements_fly_cal_corr_s |
| binary uint32 | size: 4 |
|---|
|
Maximum number of measures derived from single PTR measurements to be averaged to get Fligt Calibration Correction Parameters for the S band
|
|
| 15 | min_cal_data_required_ku |
| binary uint16 | size: 2 |
|---|
|
Minimum number of calibration data from single Ku PTR measurements required for evaluation of smooted flight calibration parameters
|
|
| 16 | min_cal_data_required_s |
| binary uint16 | size: 2 |
|---|
|
Minimum number of calibration data from single S PTR measurements required for evaluation of smooted flight calibration parameters
|
|
| 17 | max_time_lag_in_sp_multiples_ku |
| binary uint32 | size: 4 |
|---|
|
Maximum time lag in SP multiples between Ku PTR measurements
|
|
| 18 | max_time_lag_in_sp_multiples_s |
| binary uint32 | size: 4 |
|---|
|
Maximum time lag in SP multiples between S PTR measurements
|
|
| 19 | npm_meas_scaling_factor |
| binary uint32 | size: 4 |
|---|
Scaling multiplicative factor for NPM measurement
unit: "1e-2"
|
|
| 20 | hpa_default_ref_value_for_redundancy_flag |
| binary uint8 | size: 1 |
|---|
|
Default reference value for redundancy flag of HPA subsystem required to manage event of unknown devocded value in Red_vec_HPA flag (0: chain A, 3: chain B)
|
|
| 21 | rfss_default_ref_value_for_redundancy_flag |
| binary uint8 | size: 1 |
|---|
|
Default reference value for redundancy flag of HPA subsystem required to manage event of unknown devocded value in Red_vec_HPA flag (0: chain A, 3: chain B)
|
|
| 22 | num_obdh_clocks_between_source_packets |
| binary uint32 | size: 4 |
|---|
|
Number of OBDH clocks between two consecutive source packets
|
|
| 23 | tol_num_obdh_clocks |
| binary uint32 | size: 4 |
|---|
|
Tolerance of number of OBDH clocks between two consecutive source packets
|
|
| 24 | num_uso_counter_clocks |
| binary uint32 | size: 4 |
|---|
|
Number of USO counter clocks between two consecutive source packets
|
|
| 25 | tol_num_uso_counter_clocks |
| binary uint32 | size: 4 |
|---|
|
Tolerance on number of USO counter clocks between two consecutive source packets
|
|
| 26 | offset_for_data_blocks_datation_calculation |
| binary int32 | size: 4 |
|---|
Offset for data blocks datation calculation
unit: "1e-2"
|
|
| 27 | offset_for_waveform_delay_rate_compensation |
| binary int32 | size: 4 |
|---|
Offset for waveform delay rate compensation
unit: "1e-2"
|
|
| 28 | time_lag_level_0_utc_and_if_mask_fly_cal_datation |
| binary uint32 | size: 4 |
|---|
Time lag to compare Level 0 product UTC datation and IF mask flight calibration datation for IF mask selection
unit: "s"
|
|
| 29 | time_lag_level_0_utc_and_uso_cal_datation |
| binary uint32 | size: 4 |
|---|
Time lag to compare Level 0 product UTC datation and USO calibration datation for IF mask selection
unit: "s"
|
|
| 30 | ref_values_for_if_mask_quality_check |
| binary array[2] | size: 8 |
|---|
Rereference values for IF mask quality check
| binary int32 | size: 4 |
|---|
|
unit: "1e-4"
|
|
|
| 31 | min_num_if_noise_spectra_avg |
| binary int32 | size: 4 |
|---|
|
Minimum number of IF noise spectra to be averaged
|
|
| 32 | num_noise_samples_skipped |
| binary uint16 | size: 2 |
|---|
|
Number of noise samples skipped at edges of FFT filter bank in IF mask retrieval processing
|
|
| 33 | num_packets_skipped_at_beginning |
| binary uint16 | size: 2 |
|---|
|
Number of packets skipped at beginning of Level 0 product for IF mask retrieval processing
|
|
| 34 | ref_values_for_txrx_clock_quality_check |
| binary array[2] | size: 8 |
|---|
Reference values for TX/RX clock quality check
| binary int32 | size: 4 |
|---|
|
unit: "ps"
|
|
|
| 35 | isp_num_in_first_prod_for_uso_cal |
| binary uint32 | size: 4 |
|---|
|
ISP number in first Level 0 product selected for the USO calibration processing
|
|
| 36 | isp_num_in_second_prod_for_uso_cal |
| binary uint32 | size: 4 |
|---|
|
ISP number in second Level 0 product selected for the USO calibration processing
|
|
| 37 | min_time_lag_between_uso_dat |
| binary uint32 | size: 4 |
|---|
Minimum time lag between USO datation measurements needed for USO calibration processing
unit: "s"
|
|
| 38 | ra2_proc_thresh |
| binary uint16 | size: 2 |
|---|
Threshold for Level 1B SPH field RA2_PROC_THRESH
unit: "1e-2 %"
|
|
| 39 | ra2_header_thresh |
| binary uint16 | size: 2 |
|---|
Threshold for Level 1B SPH field RA2_HEADER_THRESH
unit: "1e-2 %"
|
|
| 40 | buf_len_s_band_anomaly_flag |
| binary uint16 | size: 2 |
|---|
|
Buffer length for S-band anomaly flag
|
|
| 41 | counter_s_band_anomaly_flag |
| binary uint16 | size: 2 |
|---|
|
Counter for S-band anomaly flag
|
|
| 42 | step |
| binary uint16 | size: 2 |
|---|
|
Time interval used to calculate each sample of the unsmoothed clock period
|
|
| 43 | smooth_fact |
| binary uint16 | size: 2 |
|---|
Smoothing factor used to perform the smoothing and obtain final clock period data stream
unit: "1e-7 ps"
|
|
| 44 | uso_corr_switch |
| binary uint8 | size: 1 |
|---|
|
USO correction switch (correction run within the Level 1b or taken from the auxiliary file)
|
|
| 45 | thresh_sample_value |
| binary int16 | size: 2 |
|---|
|
Threshold for the evaluation of the sample value wraparound, in the anomalous S-band waveform reconstruction algorithm (unit: FFT power units)
|
|
| 46 | spare_2 |
hidden: true
|