id | field name | definition |
0 | num_measurement_laser_freq_unlocked |
binary int32 | size: 4 |
Number of measurements with laser transmitter frequency unlocked status
|
|
1 | num_reference_pulse_laser_freq_unlocked |
binary int32 | size: 4 |
Number of reference pulses with laser transmitter frequency unlocked status
|
|
2 | num_sat_not_on_target_measurements |
binary int32 | size: 4 |
Number of measurements with the satellite not no target status
|
|
3 | num_corrupt_mie_measurements |
binary int32 | size: 4 |
Number of corrupt Mie measurements
|
|
4 | num_corrupt_rayleigh_measurements |
binary int32 | size: 4 |
Number of corrupt Rayleigh measurements
|
|
5 | num_corrupt_mie_reference_pulses |
binary int32 | size: 4 |
Number of corrupt Mie reference pulses
|
|
6 | num_corrupt_rayleigh_reference_pulses |
binary int32 | size: 4 |
Number of corrupt Rayleigh reference pulses
|
|
7 | avg_laser_frequency_offset |
binary double | size: 8 |
Average laser frequency offset
unit: "GHz"
|
|
8 | avg_uv_energy |
binary double | size: 8 |
Average laser UV energy
unit: "mJ"
|
|
9 | laser_frequency_offset_std_dev |
binary double | size: 8 |
Laser frequency offset standard deviation
unit: "GHz"
|
|
10 | uv_energy_std_dev |
binary double | size: 8 |
Laser pulse UV energy standard deviation
unit: "mJ"
|
|
11 | num_mie_peak_invalid |
binary int32 | size: 4 |
Number of invalid Mie bin due to invalid peak fit of the measurement data or reference pulse data
|
|
12 | observation_alt_bin_pcd |
binary array[25] | size: 3650 |
binary record | size: 146 |
Level 1B Observation Alt Bin PCD
id | field name | definition |
0 | error_quantifier_mie |
binary double | size: 8 |
Error quantifier for Mie
unit: "m/s"
|
|
1 | error_quantifier_rayleigh |
binary double | size: 8 |
Error quantifier for Rayleigh
unit: "m/s"
|
|
2 | error_quantifier_rayleigh_channel_a |
binary double | size: 8 |
Error quantifier for Rayleigh channel A
unit: "AU"
|
|
3 | error_quantifier_rayleigh_channel_b |
binary double | size: 8 |
Error quantifier for Rayleigh channel B
unit: "AU"
|
|
4 | mie_wind_velocity_std_dev |
binary double | size: 8 |
Mie wind velocity standard deviation of the altitude bin
unit: "AU"
|
|
5 | rayleigh_wind_velocity_std_dev |
binary double | size: 8 |
Rayleigh wind velocity standard deviation of the altitude bin
unit: "AU"
|
|
6 | mie_useful_signal_std_dev |
binary double | size: 8 |
Mie useful signal tandard deviation of the altitude bin
unit: "AU"
|
|
7 | rayleigh_useful_signal_channel_a_std_dev |
binary double | size: 8 |
Rayleigh channel A useful signal tandard deviation of the altitude bin
unit: "AU"
|
|
8 | rayleigh_useful_signal_channel_b_std_dev |
binary double | size: 8 |
Rayleigh channel B useful signal tandard deviation of the altitude bin
unit: "AU"
|
|
9 | mie_core_characteristic |
|
10 | scattering_ratio_mie |
binary double | size: 8 |
Scattering ratio of the altitude bin
unit: "AU"
|
|
11 | mie_signal_to_noise_ratio |
binary double | size: 8 |
Mie signal-to-noise ratio of the altitude bin. If the Mie Signal-to-Noise ratio cannot be computed, this field is set to 1.0
unit: "AU"
|
|
12 | rayleigh_signal_to_noise_ratio_channel_a |
binary double | size: 8 |
Rayleigh channel A signal-to-noise ratio of the altitude bin. If the Rayleigh channel A Signal-to-Noise ratio cannot be computed, this field is set to 1.0
unit: "AU"
|
|
13 | rayleigh_signal_to_noise_ratio_channel_b |
binary double | size: 8 |
Rayleigh channel B signal-to-noise ratio of the altitude bin. If the Rayleigh channel B Signal-to-Noise ratio cannot be computed, this field is set to 1.0
unit: "AU"
|
|
|
|
|
13 | num_mie_invalid_measurements |
binary int32 | size: 4 |
Number of Mie invalid measurement data over all bins due to source packet invalid, data corruption, laser frequency unlocked, or satellite attitude not on target
|
|
14 | num_mie_invalid_reference_pulse |
binary int32 | size: 4 |
Number of Mie invalid measurement data over all bins due to source packet invalid, data corruption, or laser frequency unlocked
|
|
15 | num_rayleigh_invalid_measurements |
binary int32 | size: 4 |
Number of Rayleigh invalid measurement data over all bins due to source packet invalid, data corruption, laser frequency unlocked, or satellite attitude not on target
|
|
16 | num_rayleigh_invalid_reference_pulse |
binary int32 | size: 4 |
Number of Rayleigh invalid measurement data over all bins due to source packet invalid, data corruption, or laser frequency unlocked
|
|
17 | mie_mean_emitted_frequency |
binary double | size: 8 |
Emitted responses calculated using : eqn 58 from R-2 for the reference pulse of the observation : eqn 60 from R-2 for the reference pulse of a measuremen : emitted responses are then converted to emitted frequencies
unit: "GHz"
|
|
18 | mie_emitted_frequency_std_dev |
binary double | size: 8 |
Emitted frequencies standard deviation
unit: "GHz"
|
|
19 | rayleigh_mean_emitted_frequency |
binary double | size: 8 |
Emitted responses calculated using : eqn 58 from R-2 for the reference pulse of the observation : eqn 60 from R-2 for the reference pulse of a measuremen : emitted responses are then converted to emitted frequencies
unit: "GHz"
|
|
20 | rayleigh_emitted_frequency_std_dev |
binary double | size: 8 |
Emitted frequencies standard deviation
unit: "GHz"
|
|
21 | multimode_ratio_quality_flag |
binary uint8 | size: 1 |
Flag that is set if the multimode ratio falls below the multimode ratio threshold for an observation
|
|
22 | spare_3 |
binary bytes | size: 4 |
Spare
|
hidden: true
|