id | field name | definition |
0 | hlos_error_estimate |
binary uint16 | size: 2 |
Error estimate reported by the Mie processing algorithm, given in cm/s and rounded to the nearest integer
unit: "cm/s"
|
|
1 | reference_hlos |
binary int16 | size: 2 |
Reference HLOS wind taken from the matching profile in the AUX_MET file that was used for processing (and as is used for calculating O-B statistics), given in cm/s and rounded to the nearest integer.
unit: "cm/s"
|
|
2 | flags1 |
binary uint8 | size: 1 |
First flag describing Mie processing results for the current wind result.
|
|
3 | flags2 |
binary uint8 | size: 1 |
Second flag describing Mie processing results for the current wind result.
|
|
4 | flags3 |
binary uint8 | size: 1 |
Third flag describing Mie processing results for the current wind result.
|
|
5 | flags4 |
binary uint8 | size: 1 |
Fourth flag describing Mie processing results for the current wind result.
|
|
6 | intref_fitting_amplitude |
binary double | size: 8 |
Amplitude of the curve used for fitting the internal reference spectrum
|
|
7 | intref_fitting_residual |
binary double | size: 8 |
Residual after the fit to the internal reference spectrum is performed (should also give an idea of the reliability of the fit)
|
|
8 | intref_fitting_offset |
binary double | size: 8 |
Offset of the curve used for fitting the internal reference spectrum
|
|
9 | intref_fitting_fwhm |
binary double | size: 8 |
FWHM of the curve used for fitting internal reference the spectrum.
|
|
10 | intref_fitting_peakloc |
binary double | size: 8 |
Peak location result from fitting the internal reference spectrum.
|
|
11 | intref_fitting_offsetsub |
binary double | size: 8 |
Offset subtraction as applied to the fit result of the internal reference spectrum.
|
|
12 | intref_fitting_valflag |
binary uint8 | size: 1 |
Validity flag indicating the succes of fitting the internal reference spectrum.
|
|
13 | intref_fitting_mie_snr |
binary double | size: 8 |
Refined SNR value derived by fitting the internal reference spectrum.
|
|
14 | intref_fitting_mie_sr |
binary double | size: 8 |
Refined Scattering Ratio value derived by fitting the internal reference spectrum.
|
|
15 | fitting_amplitude |
binary double | size: 8 |
Amplitude of the curve used for fitting the Mie spectrum
|
|
16 | fitting_residual |
binary double | size: 8 |
Residual after the fit to the Mie spectrum is performed (should also give an idea of the reliability of the fit)
|
|
17 | fitting_offset |
binary double | size: 8 |
Offset of the curve used for fitting the Mie spectrum
|
|
18 | fitting_fwhm |
binary double | size: 8 |
FWHM of the curve used for fitting the Mie spectrum. This gives a measure of the wind variability in this rangebin
|
|
19 | fitting_peakloc |
binary double | size: 8 |
Peak location result from fitting the measured atmospheric Mie spectrum.
|
|
20 | fitting_offsetsub |
binary double | size: 8 |
Offset subtraction as applied to the fit result of the measured atmospheric Mie spectrum.
|
|
21 | fitting_valflag |
binary uint8 | size: 1 |
Validity flag indicating the succes of fitting the measured atmospheric Mie spectrum.
|
|
22 | fitting_mie_snr |
binary double | size: 8 |
SNR of the measured atmospheric Mie spectrum
|
|
23 | fitting_mie_sr |
binary double | size: 8 |
Refined Scattering ratio value derived by fitting the accumulated measured atmospheric Mie spectrum
|
|
24 | extinction |
binary double | size: 8 |
Extinction
unit: "1/m"
|
|
25 | mie_background_high |
binary uint8 | size: 1 |
A value of 1 indicates that this data was taken during daylight, so possibly the background radiation level is high.
|
|
26 | spare |
binary bytes | size: 1 |
Spare
|
hidden: true
|