id | field name | definition |
0 | mdsr_time |
binary time | size: 12 |
Data record time (MDSR time stamp)
unit: "s since 2000-01-01"
value: float(./days) * 86400 + float(./seconds) + float(./microseconds) / 1000000
binary record | size: 12 |
ENVISAT binary datetime
id | field name | definition |
0 | days |
binary int32 | size: 4 |
days since January 1st, 2000 (may be negative)
unit: "days since 2000-01-01"
|
|
1 | seconds |
binary uint32 | size: 4 |
seconds since start of day
unit: "s"
|
|
2 | microseconds |
binary uint32 | size: 4 |
microseconds since start of second
unit: "1e-6 s"
|
|
|
|
|
1 | uso_corr |
binary int32 (double) | size: 4 |
USO correction factor
converted unit: "" (multiply by 1/1000000000000000)
|
|
2 | mode_id |
|
3 | src_seq_count |
binary uint16 | size: 2 |
Source sequence counter (only for LRM - spare in SAR and SARin)
|
|
4 | instr_conf_flags |
|
5 | burst_count |
binary uint32 | size: 4 |
Burst counter (surface sample counter, always starts from 1 and incremented at group rate)
|
|
6 | lat |
binary int32 (double) | size: 4 |
Latitude of measurement
unit: "1e-7 degrees_north"
converted unit: "degrees_north" (multiply by 1/10000000)
|
|
7 | lon |
binary int32 (double) | size: 4 |
Longitude of measurement
unit: "1e-7 degrees_east"
converted unit: "degrees_east" (multiply by 1/10000000)
|
|
8 | alt_cog_ref_ellip |
binary int32 | size: 4 |
Altitude of CoG above reference ellipsoid (interpolated value)
unit: "mm"
|
|
9 | inst_alt_rate |
binary int32 | size: 4 |
Instantaneous altitude rate derived from orbit
unit: "mm/s"
|
|
10 | sat_vel_vec |
binary array[3] | size: 12 |
Satellite velocity vector[3] described in the international terrestial reference frame in the international earth fixed system. Note that this is not a unit vector, because the velocity magnitude is needed as well.
binary int32 | size: 4 |
Velocity vector component
unit: "mm/s"
|
|
|
11 | beam_dir_vec |
binary array[3] | size: 12 |
Real beam direction vector[3] described in the CRYOSAT reference frame
binary int32 (double) | size: 4 |
Beam direction vector component
unit: "1e-6 m"
converted unit: "m" (multiply by 1/1000000)
|
|
|
12 | ifm_basel_vec |
binary array[3] | size: 12 |
Interferometer baseline vector[3] described in the CRYOSAT reference frame
binary int32 (double) | size: 4 |
Baseline vector component
unit: "1e-6 m"
converted unit: "m" (multiply by 1/1000000)
|
|
|
13 | star_trkr_usage |
binary uint16 | size: 2 |
The following mode dependent values are valid Star Tracker Usage. For LRM/SAR/SARin: 0 = No Star Tracker data used for product generation and attitude initialisation done by using default values from the IPFDB; 4 = Star Tracker data used for product generation and these data are the same used by the satellite through its AOCS (Attitude Orbit Control System). For FDM: 0 = No Star Tracker data used for product generation and attitude initialisation done by using default values from the IPFDB; 1 = Data of Star Tracker 1 used for product generation; 2 = Data of Star Tracker 2 used for product generation; 3 = Data of Star Tracker 3 used for product generation
|
|
14 | ant_bench_roll_angle |
binary int32 (double) | size: 4 |
Antenna Bench Roll Angle
unit: "1e-7 degrees"
converted unit: "degrees" (multiply by 1/10000000)
|
|
15 | ant_bench_pitch_angle |
binary int32 (double) | size: 4 |
Antenna Bench Pitch Angle
unit: "1e-7 degrees"
converted unit: "degrees" (multiply by 1/10000000)
|
|
16 | ant_bench_yaw_angle |
binary int32 (double) | size: 4 |
Antenna Bench Yaw Angle
unit: "1e-7 degrees"
converted unit: "degrees" (multiply by 1/10000000)
|
|
17 | meas_conf_flags |
|
18 | spare_1 |
binary bytes | size: 4 |
spare
|
hidden: true
|