id | field name | definition |
0 | no_valid |
binary uint8 | size: 1 |
No valid data flag. 0 = valid data was found in the Level 0 product; 1 = no valid packets in the Level 0 product.
|
|
1 | no_int_stray |
binary uint8 | size: 1 |
Internal straylight correction flag. 1 = internal straylight correction was not performed; 0 = internal straylight correction was performed.
|
|
2 | no_ext_earth |
binary uint8 | size: 1 |
External earth straylight correction flag. 1 = external earth straylight correction was not performed; 0 = otherwise.
|
|
3 | no_ext_sun |
binary uint8 | size: 1 |
External sun straylight correction flag. 1 = external sun straylight correction was not performed; 0 = otherwise.
|
|
4 | no_slit_trans |
binary uint8 | size: 1 |
Slit transmission correction flag. 1 = slit transmission correction was not performed; 0 = otherwise.
|
|
5 | no_ref_star_comp |
binary uint8 | size: 1 |
PCD flag for reference star spectrum computation. 0 = no problem; 1 = the reference star spectrum was computed with a small number of measurements; 2 = no valid measurements in the occultation to compute the reference star spectrum (see ref_star_db and no_ref_star).
|
|
6 | ref_star_db |
binary uint8 | size: 1 |
PCD flag indicating that the star spectrum has been read from the stellar spectra database. 0 = the reference spectrum is computed from the measurements; 1 = the reference spectrum is read in the database; 2 = the reference spectrum was not found in the stellar spectra data base (see no_ref_star).
|
|
7 | no_ref_star |
binary uint8 | size: 1 |
PCD flag indicating that the reference star spectrum has not been computed. 1 = the reference star spectrum has not been computed; 0 = the reference star spectrum was computed.
|
|
8 | satu_flag |
binary uint8 | size: 1 |
PCD flag indicating that the SATU data have been used for flat field correction. 1 = the SATU data are used; 0 = the SATU data are not used.
|
|
9 | dark_charge_flag |
binary uint8 | size: 1 |
PCD flag for the dark charge computation (photometers). 1 = no DC correction performed; 0 = DC correction performed.
|
|
10 | num_sp_err |
binary uint32 | size: 4 |
Number of source packets containing errors. This value wil equal the number of Transmission MDSRs with their quality flag set to -1.
|
|
11 | lev0_id |
binary uint8 | size: 1 |
Level 0 PCD. 0 = standard occultation; 1 = first part of a tangent occultation; 2 = last part of a tangent occultation
|
|
12 | atm_type |
binary uint8 | size: 1 |
Type of atmosphere file used. 54 = One ECMWF file used. Time recorded is included in the occultation period; 102 = One ECMWF file used. Time recorded before the beginning of the occultation (Delta t <= 24h); 103 = One ECMWF file used. Time recorded after the beginning of the occultation (Delta t <= 24h); 106 = One ECMWF file used. Only one time record in the validity interval (Delta t <= 24h); 155 = Two ECMWF files used; 201 = No ECMWF file available. Use MSIS model alone; 202 = Only old ECMWF files (Delta t >= 24h). Use MSIS model alone; 203 = Only future ECMWF files (Delta t >= 24h). Use MSIS model alone; 206 = No ECMWF file available in the validity interval (Delta t >= 24h). Use MSIS model alone.
|
|
13 | dark_charge_info |
binary uint8 | size: 1 |
Dark charge correction information. 0 = dark charge map used; 1 = first measurements used; 2 = no dark charge correction applied; 11 = first measurements not available - DC corrections with DC maps; 12 = first measurements not available and missing first packet - DC correction with DC maps without temperature dependence; 21 = dark charge map computed from DSA observation has been used.
|
|
14 | dark_limb_cond |
binary uint8 | size: 1 |
Dark/bright limb condition. 0 = dark limb; 1 = bright limb.
|
|
15 | obs_illum_cond |
binary uint8 | size: 1 |
Observation illumination condition. 0 = full dark limb condition; 1 = bright limb condition; 2 = pure twilight condition; 3 = straylight condition; 4 = twilight and straylight condition.
|
|
16 | sdp_extract |
binary uint32 | size: 4 |
SDP extraction processing. Number of invalid measurements during the occultation.
|
|
17 | dat_err |
binary uint32 | size: 4 |
Datation errors. Number of measurements where flags were raised to indicate a datation problem occurred.
|
|
18 | rt_err |
binary uint32 | size: 4 |
Ray tracing errors. Number of measurements with a non-converged ray path.
|
|
19 | geo_err |
binary uint32 | size: 4 |
Geolocation errors. Number of measurements performed outside the atmosphere, set to 1000 if completely performed outside the atmosphere.
|
|
20 | sat_err |
binary uint32 | size: 4 |
Saturation errors. Number of measurements containing saturated samples.
|
|
21 | cr_err |
binary uint32 | size: 4 |
Cosmic ray errors. Number of measurements where cosmic rays have been detected.
|
|
22 | mod_corr_err |
binary uint32 | size: 4 |
Modulation correction errors. Number of measurements where a modulation correction error has been detected.
|
|
23 | vign_err |
binary uint32 | size: 4 |
Vignetting correction. Number of measurements where the vignetting correction was applied.
|
|
24 | num_cent_back |
binary uint32 | size: 4 |
Central Background. Number of measurements where FLAGbg(f) has been raised.
|
|
25 | num_flat |
binary uint32 | size: 4 |
Flat field correction. Number of measurements where the star falls outside the central band.
|
|
26 | num_full_trans_err |
binary uint32 | size: 4 |
Full transmission errors. Number of measurements where a problem has been detected during the full transmission computation.
|
|
27 | num_bad |
binary uint32 | size: 4 |
Bad Pixels. Number of bad pixels per measurement
|
|
28 | num_fp_sat |
binary array[2] | size: 8 |
Photometer saturation. Number of photometers saturated samples. First number is for photometer 1 second is for photometer 2
|
|
29 | back_corr_flag |
binary uint8 | size: 1 |
Background correction flag. 0 = no background correction; 1 = background correction applied (linear interpolation); 2 = background correction applied (exponential interpolation); 3 = background correction applied (general method).
|
|
30 | spec_eff_sampl_time |
binary float | size: 4 |
Spectrometer effective sampling time.
unit: "s"
|
|
31 | time_shift_rt |
binary float | size: 4 |
Effective time shift for ray tracing / geolocation.
unit: "s"
|
|
32 | lev_1b_check |
binary uint16 | size: 2 |
Level 1B PCD check. 0 = no unrecoverable errors detected in Level 1B PCD; 1 = no valid data; 2 = second part of a tangent occultation; 3 = geolocation is not valid; 4 = reference star spectra is missing.
|
|
33 | nfcr |
binary uint16 | size: 2 |
Chromatic refraction mode for the measured transmission. 0 = no correction; 1 = correction is performed.
|
|
34 | nfcr20 |
binary uint16 | size: 2 |
Chromatic refraction mode for transmission model (second spectral inversion). 0 = no correction; 1 = correction is performed.
|
|
35 | nfcr21 |
binary uint16 | size: 2 |
Chromatic refraction mode for transmission model (third and further spectral inversions). 0 = no correction; 1 = correction is performed.
|
|
36 | nfi0 |
binary uint16 | size: 2 |
Instrument function mode for transmission model (second spectral inversion). 0 = no correction; 1 = correction is performed.
|
|
37 | alt_uc |
binary uint16 | size: 2 |
First altitude where the ratio U/C is greater than 25%.
unit: "km"
|
|
38 | nfv |
binary uint16 | size: 2 |
Vertical inversion mode. 2 = linear mode; no other values.
|
|
39 | nfs |
binary uint16 | size: 2 |
Smoothing mode (after the spectral inversion). 0 = no smoothing; 1 = Gaussian filter; 2 = Tikhonov's regularisation
|
|
40 | nft0 |
binary uint16 | size: 2 |
Time mode for transmission model (second spectral inversion). 0 = zero order term; 1 = second order term.
|
|
41 | nft1 |
binary uint16 | size: 2 |
Time mode for transmission model (third and further spectral inversions). 0 = zero order term; 1 = second order term.
|
|
42 | num_iter_main |
binary uint16 | size: 2 |
Number of iterations for main loop
|
|
43 | num_iter_inv |
binary uint16 | size: 2 |
Number of iterations for inversion loop
|
|
44 | num_prof_points |
binary uint16 | size: 2 |
Number of points in profile column densities where Chi^2 > Chi^2 (warn)
|
|
45 | num_air_col_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for air column densities
|
|
46 | num_aero_col_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for aerosol column densities
|
|
47 | num_o3_col_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for O3 column densities
|
|
48 | num_no2_col_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for NO2 column densities
|
|
49 | num_no3_col_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for NO3 column densities
|
|
50 | num_oclo_col_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for OClO column densities
|
|
51 | num_o2_col_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for O2 column densities
|
|
52 | num_h2o_col_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for H2O column densities
|
|
53 | num_air_loc_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for air local densities
|
|
54 | num_aero_loc_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for aerosol local densities
|
|
55 | num_o3_loc_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for O3 local densities
|
|
56 | num_no2_loc_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for NO2 local densities
|
|
57 | num_no3_loc_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for NO3 local densities
|
|
58 | num_oclo_loc_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for OClO local densities
|
|
59 | num_o2_loc_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for O2 local densities
|
|
60 | num_h2o_loc_flags |
binary uint16 | size: 2 |
Number of flagged points in profile for H2O local densities
|
|
61 | layer_ratio |
binary uint16 (double) | size: 2 |
Layer ratio used in vertical inversion
unit: "1e3"
converted unit: "" (multiply by 1/1000)
|
|
62 | aerosol_model |
binary uint16 | size: 2 |
Aerosol Model
|
|
63 | spec_inver_scheme |
binary uint16 | size: 2 |
Spectral inversion scheme. 0 = spectral inversion global (no GDI); 1 = spectral inversion global GDI NO2; 2 = spectral inversion global GDI NO2+NO3 (default).
|
|
64 | gomos_source_data |
binary uint8 | size: 1 |
Source of GOMOS data for GOMOS atmospheric profile. Bit 0 - Rayleigh extinction. Bit 1 - Oxygen absorption from spectrometer B; Bit 2 - Refractive dilution including scintilations; Bit 3 - Time delay between the two photometers; Bit 6 - Rayleigh. Value = 0 disabled, value = 1 enabled.
|
|
65 | obliquity |
binary float | size: 4 |
Obliquity of the occultation at 35km altitude.
|
|