MIP_PS2_AX_GADS_pt_v0

binary record ""

field name

definition

dsr_time

binary time

size: 12

Time of creation

unit: "s since 2000-01-01"

value: float(./days) * 86400 + float(./seconds) + float(./microseconds) / 1000000

binary record size: 12

ENVISAT binary datetime

id field name definition

0 days

binary int32 size: 4

days since January 1st, 2000 (may be negative)

unit: "days since 2000-01-01"

1 seconds

binary uint32 size: 4

seconds since start of day

unit: "s"

2 microseconds

binary uint32 size: 4

microseconds since start of second

unit: "1e-6 s"

min_val_non_sing

binary double	size: 8
Minimum value used to check non-singularity of matrix

a_priori_switch

binary uint16	size: 2
Switch for usage of a priori pointing information

spare_1

binary bytes	size: 12
Spare

hidden: true

max_elements

binary uint16	size: 2
Maximum number of elements in profiles

num_unsuccess

binary uint16	size: 2
Number of allowed unsuccessful previous retrievals

enh_spec_range

binary double	size: 8
Enhanced spectral range of microwindows used to decide whether a line inside the microwindow shall be considered as line or as nearby continuum unit: "1/cm"

max_samples_fine

binary uint16	size: 2
Maximum number of spectral samples on fine grid

chi2_thresh

binary double	size: 8
Threshold to check convergence of Chi^2

thresh_fitted_press

binary double	size: 8
Threshold to check convergence of fitted pressure

thresh_fitted_temp

binary double	size: 8
Threshold to check convergence of fitted temperature

spare_2

binary bytes	size: 2
Spare

hidden: true

max_macro_iter_gauss

binary uint16	size: 2
Maximum number of Gauss-Newton macro-iterations

spare_3

binary bytes	size: 2
Spare

hidden: true

max_num_marq

binary uint16	size: 2
Maximum number of Marquardt micro-iterations

low_thresh_press

binary double	size: 8
Lower threshold of estimated pressure unit: "hPa"

up_thresh_press

binary double	size: 8
Upper threshold of estimated pressure unit: "hPa"

low_thresh_temp

binary double	size: 8
Lower threshold of estimated temperature unit: "K"

up_thresh_temp

binary double	size: 8
Upper threshold of estimated temperature unit: "K"

low_thresh_cont

binary double	size: 8
Lower threshold of estimated continuum parameter unit: "cm2"

up_thresh_cont

binary double	size: 8
Upper threshold of estimated continuum parameter unit: "cm2"

constr_alt_corr_switch

binary uint16	size: 2
Switch for activation of contraining of altitude correction

constr_max_rel_p_corr

binary double	size: 8
Contraining of maximum relative pressure correction unit: "%"

spare_4

binary bytes	size: 14
Spare

hidden: true

diff_spec_res

binary double	size: 8
Difference between spectral resolution of general fine wavenumber grid and spectral grid of cross section look-up tables unit: "1/cm"

pre_stored_switch

binary uint16	size: 2
Switch for using pre-stored spectra and Jacobian matrix

cont_param

binary uint16	size: 2
Control parameter for fitting of continuum and instrumental offset

up_alt_cont

binary double	size: 8
Upper altitude limit where continuum shall be fitted unit: "km"

zero_alt_cont

binary double	size: 8
Altitude above which the continuum shall be set to zero unit: "km"

spare_5

binary bytes	size: 8
Spare

hidden: true

max_fitted

binary uint16	size: 2
Maximum number of fitted parameters

spec_overlap

binary double	size: 8
Overlap of spectral range between two adjacent microwindows unit: "%"

temp_inc

binary double	size: 8
Temperature increment used to compute perturbed temperature profile unit: "K"

cent_wvn

binary double	size: 8
Central wavenumber of the line used as reference unit: "1/cm"

temp_coef_lorentz

binary double	size: 8
Coefficient of temperature dependence of Lorentz half-width of the line used as reference

guess_alt

binary double	size: 8
Guess of altitude increment above highest level unit: "km"

red_fact

binary double	size: 8
Reduction factor applied to guess of altitude increment

up_lim_atm

binary double	size: 8
Upper limit of atmosphere unit: "km"

half_width_ref

binary double	size: 8
Half-width of the line used as reference unit: "1/cm"

max_temp_var_low

binary double	size: 8
Maximum allowed temperature variation between atmospheric levels for lower altitudes unit: "K"

max_temp_var_high

binary double	size: 8
Maximum allowed temperature variation between atmospheric levels for higher altitudes unit: "K"

alt_thresh_change

binary double	size: 8
Altitude threshold where temperature thresholds are changed unit: "km"

max_var_half_width

binary double	size: 8
Maximum allowed variation of half-width of the line between adjacent atmospheric levels unit: "1/cm"

num_max_atm

binary uint16	size: 2
Number of maximum levels for modeling of the atmosphere

max_diff_gas

binary uint16	size: 2
Maximum number of different gases

max_geom

binary uint16	size: 2
Maximum number of simulated geometries

max_param_pt

binary uint16	size: 2
Maximum number of parameters to be retrieved for p, T and continuum

coef_corr_grav

binary array[2]

size: 16

Coefficients for latitude dependent correction of gravity acceleration

binary double size: 8

eq_ref_temp

binary double	size: 8
Equivalent reference temperature unit: "K"

eq_ref_press

binary double	size: 8
Reference equivalent pressure at equivalent reference temperature used for line computation unit: "hPa"

approx_err_int

binary double	size: 8
Approximation error of integrals (Curtis-Godson)

init_temp_pert

binary double	size: 8
Initial temperature of perturbed equivalent temperature unit: "K"

max_layers

binary uint16	size: 2
Maximum number of layers

max_samp_integrand

binary uint16	size: 2
Minimum number of samples at which the integrand of each integral shall be computed

max_base_profile_elems

binary uint16	size: 2
Maximum number of elements in base profiles

min_integrate_var

binary double	size: 8
Minimum value of integration variable

num_add_iapt_num

binary uint16	size: 2
Number of additional IAPT numbers for each geometry above the lowest geometry

half_width_mult_lorentz

binary double	size: 8
Multiplier for Lorentz and Doppler half width used for Lorentz lineshape computations on the local coarse wavenumber grid

half_width_mult_voigt

binary double	size: 8
Multiplier for Doppler half width used for Voigt lineshape computations on the local fine wavenumber grid

interp_switch

binary int16	size: 2
Switch for interpolation of absorption cross sections for geometries above the lowest geometry

cross_switch

binary uint16	size: 2
Switch for usage of cross section lookup tables

spare_6

binary bytes	size: 8
Spare

hidden: true

co2_chi_switch

binary uint16	size: 2
Switch for computation of CO2 Chi factor

mult_fact_voigt

binary double	size: 8
Multiplication factor applied to approximate Voigt half width to determine the local fine grid

mult_fact_coarse

binary uint16	size: 2
Multiplier for definition of local coarse wavenumber grid

spare_7

binary bytes	size: 8
Spare

hidden: true

num_samp_x

binary uint16	size: 2
Number of samples along x coordinate

num_samp_y

binary uint16	size: 2
Number of samples along y coordinate

great_base

binary double	size: 8
Greater base of trapezium defining the vertical FOV unit: "km"

small_base

binary double	size: 8
Smaller base of trapezium defining the vertical FOV unit: "km"

spare_8

binary bytes	size: 8
Spare

hidden: true

lambda_damp_fact

binary double	size: 8
Lambda damping factor

scale_lambda_damp_fact

binary double	size: 8
Scaling of lambda damping factor related to continuum parameters

scale_dec_lambda

binary double	size: 8
Scaling factor used to decrease lambda at each macro iteration

scale_inc_lambda

binary double	size: 8
Scaling factor used to increase lambda at each micro iteration

max_rel_press_error

binary double	size: 8
Threshold for maximum relative error of retrieved pressure

temp_thresh_err

binary double	size: 8
Temperature threshold used to check the maximum error of retrieved temperature unit: "K"

prev_prof_switch

binary uint16	size: 2
Switch for usage of previous retrieved profiles

half_width_const

binary array[3]

size: 24

Constants for computation of half-width

binary double size: 8

spare_9

binary bytes	size: 2
Spare

hidden: true

samp_inter_x_voigt

binary double	size: 8
Sampling interval of x coordinate of Voigt LUT

samp_inter_y_voigt

binary double	size: 8
Sampling interval of y coordinate of Voigt LUT

ref_half_width_exp

binary double	size: 8
Reference half width exponent of lineshape to be computed

ref_half_width

binary double	size: 8
Reference half-width of lineshape to be computed unit: "1/cm"

sd_ig2_profile

binary double	size: 8
Standard deviation of IG2 profile at reference pressure

ref_pressure_sd_ig2_profile

binary double	size: 8
Reference pressure for standard deviation of IG2 profile unit: "hPa"

grad_sd_ig2_profile

binary double	size: 8
Gradient of standard deviation of IG2 profile

corr_factor_first_diag_elem

binary double	size: 8
Correlation factor for first diagonal elements of interpolated VCM for IG2

sd_ecmwf_profile

binary double	size: 8
Standard deviation of ECMWF profile at reference pressure

ref_pressure_sd_ecmwf_profile

binary double	size: 8
Reference pressure for standard deviation of ECMWF profile unit: "hPa"

grad_sd_ecmwf_profile

binary double	size: 8
Gradient of standard deviation of ECMWF profile

corr_factor_ecmwf

binary double	size: 8
Correlation factor for first diagonal elements of interpolated VCM for ECMWF

time_const_aging_vcm

binary double	size: 8
Time constant for aging VCM of retrieved profiles unit: "s"

height_tropopause

binary double	size: 8
Height of tropopause at poles unit: "km"

incr_tropopause_height

binary double	size: 8
Increment of tropopause height unit: "km"

sim_geom_below_trop

binary double	size: 8
Maximum distance of simulated geometries below tropopause unit: "km"

sim_distance_above_trop

binary double	size: 8
Maximum distance of simulated geometries above tropopause unit: "km"

enabling_profile_reg

binary uint16	size: 2
Switch for enabling profile regularisation

param_tuning_profile_reg

binary double	size: 8
Parameter for tuning profile regularisation

diag_reg_matrix

binary array[2]

size: 16

Diagonal and first off-diagonal element of regularisation matrix referring to pressure

binary double size: 8

100

diag_reg_matrix_temp

binary array[2]

size: 16

Diagonal and first off-diagonal element of regularisation matrix referring to temperature

binary double size: 8

101

diag_reg_matrix_cont

binary array[2]

size: 16

Diagonal and first off-diagonal element of regularisation matrix referring to continuum

binary double size: 8

102

diag_reg_matrix_offset

binary array[2]

size: 16

Diagonal and first off-diagonal element of regularisation matrix referring to offset

binary double size: 8

103

switch_fov_tab_func

binary uint16	size: 2
Switch for usage of FOV tabulated function

104

max_sim_geom_fov

binary uint16	size: 2
Maximum number of simulated geometries for FOV

105

num_points_fov_tab

binary uint16	size: 2
Number of points for FOV tabulation

106

heights_fov_func

binary array[dim_0]

Heights of FOV function

dim_0: int(../num_points_fov_tab)

binary double size: 8

107

grid_fov_func

binary array[dim_0]

Grid for FOV function

dim_0: int(../num_points_fov_tab)

binary double size: 8