| id | field name | definition |
| 0 | dsr_time |
| binary time | size: 12 |
MDSR Time stamp. Time fields based on UTC are computed for each record and referred to the center of the averaged waveform
unit: "s since 2000-01-01"
value: float(./days) * 86400 + float(./seconds) + float(./microseconds) / 1000000
| binary record | size: 12 |
ENVISAT binary datetime
| id | field name | definition |
| 0 | days |
| binary int32 | size: 4 |
days since January 1st, 2000 (may be negative)
unit: "days since 2000-01-01"
|
|
| 1 | seconds |
| binary uint32 | size: 4 |
seconds since start of day
unit: "s"
|
|
| 2 | microseconds |
| binary uint32 | size: 4 |
microseconds since start of second
unit: "1e-6 s"
|
|
|
|
|
| 1 | quality_flag |
| binary int8 | size: 1 |
|
Quality Indicator (-1 for blank MDSR, 0 otherwise)
|
|
| 2 | spare_1 |
| binary bytes | size: 3 |
|
Spare
|
hidden: true
|
| 3 | obdh_data_wd |
| binary uint64 | size: 8 |
(43 bits) The datatation timing words are transcriptions of the words provided in the source packet, and thus does not change for the 20 records comprising a source packet.
unit: "1/524288 s"
|
|
| 4 | uso_data_wd |
| binary uint64 | size: 8 |
(40 bits) Decoded from the secondary packet header of each source packet, and thus does not change for the 20 seconds comprising a source packet.
unit: "10 microsec"
|
|
| 5 | rec_cnt |
| binary uint32 | size: 4 |
|
Record Counter.
|
|
| 6 | sour_seq_cnt |
| binary uint16 | size: 2 |
|
Source Sequence Count. Extracted from the header of the source packet, and thus does not change for the 20 records comprising a source packet.
|
|
| 7 | data_blk_num |
| binary uint16 | size: 2 |
|
Data Block Number
|
|
| 8 | lat |
| binary int32 (double) | size: 4 |
Geodetic Latitude (positive N, negative S)
unit: "1e-6 degrees_north"
converted unit: "degrees_north" (multiply by 1/1000000)
|
|
| 9 | lon |
| binary int32 (double) | size: 4 |
Longitude (positive E, 0 at Greenwich, negative W)
unit: "1e-6 degrees_east"
converted unit: "degrees_east" (multiply by 1/1000000)
|
|
| 10 | alt_anten_ellip |
| binary uint32 | size: 4 |
Altitude of CoG above reference ellipsoid (from best available orbit)
unit: "mm"
|
|
| 11 | instant_ht_rate |
| binary int16 | size: 2 |
Instantaneous height rate derived from orbit
unit: "mm/s"
|
|
| 12 | instr_oper_id_flags |
| binary uint32 | size: 4 |
|
Instrument operations identification.
|
|
| 13 | level1b_proc_meas_conf_flags |
| binary uint32 | size: 4 |
|
Level 1B processing Measurement Confidence Data.
|
|
| 14 | spare_2 |
| binary bytes | size: 4 |
|
Spare
|
hidden: true
|
| 15 | ave_ku_wvform_corr |
| binary array[128] | size: 256 |
Average Ku-band waveform corrected for IF transfer function.
| binary uint16 | size: 2 |
|
unit: "1/2048"
|
|
|
| 16 | cen_ku_filter_dft_corr |
| binary array[2] | size: 4 |
Central Ku-band filters from DFT corrected for IF transfer function.
| binary uint16 | size: 2 |
|
unit: "1/2048"
|
|
|
| 17 | ave_s_wvform_corr |
| binary array[64] | size: 128 |
Average S-band waveforms corrected for IF transfer function.
| binary uint16 | size: 2 |
|
unit: "1/8192"
|
|
|
| 18 | ind_2add_dft_samp |
| binary array[2] | size: 4 |
Indexes of the two additional DFT samples
|
|
| 19 | ku_win_delay |
| binary uint64 | size: 8 |
Ku-band Window Delay
unit: "ps"
|
|
| 20 | s_win_delay |
| binary uint64 | size: 8 |
S-band Window Delay
unit: "ps"
|
|
| 21 | ku_agc |
| binary uint16 | size: 2 |
Ku-band AGC
unit: "1e-2 dB"
|
|
| 22 | s_agc |
| binary uint16 | size: 2 |
S-band AGC
unit: "1e-2 dB"
|
|
| 23 | rx_dist_c |
| binary uint16 | size: 2 |
RX dist C
unit: "12.5 ns"
|
|
| 24 | rx_dist_f |
| binary uint8 | size: 1 |
|
RX dist F
|
|
| 25 | spare_3 |
| binary bytes | size: 1 |
|
Spare
|
hidden: true
|
| 26 | ku_scale_fac |
| binary int16 | size: 2 |
Ku-band scaling factor for sigma zero evaluation
unit: "1e-2 dB"
|
|
| 27 | s_scale_fac |
| binary int16 | size: 2 |
S-band scaling factor for sigma zero evaluation
unit: "1e-2 dB"
|
|
| 28 | ku_time_delay_fly_cal |
| binary int32 | size: 4 |
Ku time delay flight calibration factor
unit: "ps"
|
|
| 29 | s_time_delay_fly_cal |
| binary int32 | size: 4 |
S time delay flight calibration factor
unit: "ps"
|
|
| 30 | ku_sig_zero_fly_cal |
| binary int16 | size: 2 |
Ku sigma zero flight calibration factor
unit: "1e-2 dB"
|
|
| 31 | s_sig_zero_fly_cal |
| binary int16 | size: 2 |
S sigma zero flight calibration factor
unit: "1e-2 dB"
|
|
| 32 | meas_ku_fly_cal_eval |
| binary uint16 | size: 2 |
|
Number of measures for Ku flight calibration factor evaluation
|
|
| 33 | meas_s_fly_cal_eval |
| binary uint16 | size: 2 |
|
Number of measures for S flight calibration factor evaluation
|
|
| 34 | agc_corr_ku_s_band |
| binary int16 | size: 2 |
AGC correction factor for Ku and S bands
unit: "1e-2 dB"
|
|
| 35 | spare_4 |
| binary bytes | size: 6 |
|
Spare
|
hidden: true
|
| 36 | ku_dopp_comp |
| binary int32 | size: 4 |
Ku-band Doppler compensation
unit: "ps"
|
|
| 37 | s_dopp_comp |
| binary int32 | size: 4 |
S-band Doppler compensation
unit: "ps"
|
|
| 38 | noise_pow_meas |
| binary int16 | size: 2 |
Noise power measurement
unit: "1/2048"
|
|
| 39 | agc_val_noise |
| binary uint16 | size: 2 |
AGC value of noise power measurement
unit: "1e-2 dB"
|
|
| 40 | spare_5 |
| binary bytes | size: 12 |
|
Spare
|
hidden: true
|
| 41 | width_discrim_fft |
| binary int16 | size: 2 |
|
Width discriminator in FFT filter units (unit: 1/256 FFT filter)
|
|
| 42 | cen_discrim_fft |
| binary int16 | size: 2 |
|
Centre of gravity discriminator in FFT filter units (unit: 1/256 FFT filter)
|
|
| 43 | lead_edge_pos_discrim_fft |
| binary int16 | size: 2 |
|
Leading Edge Position discriminator in FFT filter units (unit: 1/256 FFT filter)
|
|
| 44 | doffs_fft |
| binary int16 | size: 2 |
|
Doffset in FFT filter units (unit: 1/256 FFT filter)
|
|
| 45 | agc_discrim |
| binary int16 | size: 2 |
AGC discriminator
unit: "1e-2 dB"
|
|
| 46 | ref_power_val |
| binary int16 | size: 2 |
Reference Power value
unit: "1e-2 dB"
|
|
| 47 | agc_pred_rate |
| binary int16 | size: 2 |
AGC predicted rate
unit: "1e-2 dB"
|
|
| 48 | agc_corr_val |
| binary int16 | size: 2 |
AGC corrected value
unit: "1e-2 dB"
|
|
| 49 | time_delay_pred |
| binary int32 | size: 4 |
Time delay predicted rate
unit: "ps/s"
|
|
| 50 | time_delay_corr |
| binary int32 | size: 4 |
Time delay corrected value
unit: "ps"
|
|
| 51 | snr_lol_logic |
| binary uint16 | size: 2 |
SNR Loss-of-lock logic
unit: "1e-2 dB"
|
|
| 52 | trak_interpol_nd_agc |
| binary int32 | size: 4 |
Tracking filters interpolator offset Nd_AGC
unit: "1/100"
|
|
| 53 | trak_interpol_nd_trk |
| binary int32 | size: 4 |
Tracking filters interpolator offset Nd_Trk
unit: "1/100"
|
|
| 54 | mft_thresh |
| binary uint16 | size: 2 |
|
MFT Threshold
|
|
| 55 | re_logic_1_cnt |
| binary int16 | size: 2 |
|
Resolution Selection Logic first counter
|
|
| 56 | re_logic_2_cnt |
| binary int16 | size: 2 |
|
Resolution Selection Logic second counter
|
|
| 57 | alfa_coeff_dist_fil |
| binary uint32 | size: 4 |
alfa coefficient for on-board distance filter
unit: "-0.000001"
|
|
| 58 | beta_coeff_dist_fil |
| binary uint32 | size: 4 |
beta coefficient for on-board distance filter
unit: "-0.000001"
|
|
| 59 | alfa_coeff_agc_fil |
| binary uint32 | size: 4 |
alfa coefficient for on-board AGC filter
unit: "-0.000001"
|
|
| 60 | beta_coeff_agc_fil |
| binary uint32 | size: 4 |
beta coefficient for on-board AGC filter
unit: "-0.000001"
|
|
| 61 | delta_alfa_1_sf |
| binary int16 | size: 2 |
delta-alfa 1 on-board scaling factor for S band AGC evaluation
unit: "1e-2 dB"
|
|
| 62 | delta_alfa_2_sf |
| binary int16 | size: 2 |
delta-alfa 2 on-board scaling factor for S band AGC evaluation
unit: "1e-2 dB"
|
|
| 63 | delta_alfa_3_sf |
| binary int16 | size: 2 |
delta-alfa 3 on-board scaling factor for S band AGC evaluation
unit: "1e-2 dB"
|
|
| 64 | spare_6 |
| binary bytes | size: 1 |
|
Spare
|
hidden: true
|
| 65 | uso_clock_smoot |
| binary uint64 | size: 8 |
USO clock smooth
unit: "1e-6 ps"
|
|
| 66 | uso_corr_qual_flag |
| binary uint8 | size: 1 |
|
USO correction quality flag
|
|