id | field name | definition |
0 | RECORD_HEADER |
|
1 | DEGRADED_INSTR_MDR |
binary uint8 | size: 1 |
Quality of MDR has been degraded from nominal due to an instrument degradation. Occurs if any of F_NN_DT, F_NN_PDP, F_NN_RAD, F_NN_WLS_U, F_NN_WLS_I, F_NN_SLS_U, F_NN_SLS_I, F_SAT, F_MIN in PCD_BASIC has been raised
|
|
2 | DEGRADED_PROC_MDR |
binary uint8 | size: 1 |
Quality of MDR has been degraded from nominal due to a processing degradation. Occurs if F_MISS or F_OLD_CAL_DATA in PCD_BASIC have been raised
|
|
3 | OUTPUT_SELECTION |
binary uint8 | size: 1 |
Calibrated radiance or sun-normalised radiance
|
|
4 | PCD_BASIC |
binary record "" | size: 190 |
|
5 | PCD_EARTH |
binary record "" | size: 624 |
|
6 | CLOUD |
binary record "" | size: 2624 |
|
7 | OBSERVATION_MODE |
binary uint8 | size: 1 |
Observation mode (0 = nadir, 1 = north pole scanning, 2 = south pole scanning, 3 = other scanning, 4 = nadir static, 5 = other static, 6 = dark, 7 = LED, 8 = WLS, 9 = SLS, 10 = SLS over diffuser, 11 = sun, 12 = moon, 13 = idle, 14 = test, 15 = dump, 16 = invalid)
|
|
8 | PMD_TRANSFER |
binary uint8 | size: 1 |
PMD transfer mode (1 = band + raw, 2 = band + mixed, 3 = raw transfer, 4 = various (PMD transfer mode changes within a scan))
|
|
9 | PMD_READOUT |
binary uint8 | size: 1 |
PMD readout mode (0 = nominal, 1 = solar, 2 = calibration, 3 = various (PMD readout mode changes within a scan))
|
|
10 | SCANNER_ANGLE |
binary array[65] | size: 260 |
Scanner viewing angle with additional element at end of scan
binary int32 (double) | size: 4 |
unit: "1e-6 degrees"
converted unit: "degrees" (multiply by 1/1000000)
|
|
|
11 | GEO_BASIC |
binary record "" | size: 844 |
|
12 | GEO_EARTH |
binary record "" | size: 3116 |
|
13 | N_UNIQUE_INT |
binary uint8 | size: 1 |
Number of unique integration times in scan
|
|
14 | UNIQUE_INT |
binary array[10] | size: 40 |
Unique integration times in scan
binary int32 (double) | size: 4 |
unit: "1e-6 s"
converted unit: "s" (multiply by 1/1000000)
|
|
|
15 | GEO_REC_LENGTH |
binary array[10] | size: 20 |
Number of geo-record per unique integration time (gl1, gl2, ..., gl10)
|
|
16 | GEO_EARTH_ACTUAL_1 |
binary array[dim_0] |
Geolocation records given for actual integration time 1
dim_0: int(../GEO_REC_LENGTH[0])
|
|
17 | GEO_EARTH_ACTUAL_2 |
binary array[dim_0] |
Geolocation records given for actual integration time 2
dim_0: int(../GEO_REC_LENGTH[1])
|
|
18 | GEO_EARTH_ACTUAL_3 |
binary array[dim_0] |
Geolocation records given for actual integration time 3
dim_0: int(../GEO_REC_LENGTH[2])
|
|
19 | GEO_EARTH_ACTUAL_4 |
binary array[dim_0] |
Geolocation records given for actual integration time 4
dim_0: int(../GEO_REC_LENGTH[3])
|
|
20 | GEO_EARTH_ACTUAL_5 |
binary array[dim_0] |
Geolocation records given for actual integration time 5
dim_0: int(../GEO_REC_LENGTH[4])
|
|
21 | GEO_EARTH_ACTUAL_6 |
binary array[dim_0] |
Geolocation records given for actual integration time 6
dim_0: int(../GEO_REC_LENGTH[5])
|
|
22 | GEO_EARTH_ACTUAL_7 |
binary array[dim_0] |
Geolocation records given for actual integration time 7
dim_0: int(../GEO_REC_LENGTH[6])
|
|
23 | GEO_EARTH_ACTUAL_8 |
binary array[dim_0] |
Geolocation records given for actual integration time 8
dim_0: int(../GEO_REC_LENGTH[7])
|
|
24 | GEO_EARTH_ACTUAL_9 |
binary array[dim_0] |
Geolocation records given for actual integration time 9
dim_0: int(../GEO_REC_LENGTH[8])
|
|
25 | GEO_EARTH_ACTUAL_10 |
binary array[dim_0] |
Geolocation records given for actual integration time 10
dim_0: int(../GEO_REC_LENGTH[9])
|
|
26 | PDP_TEMP |
binary int32 (double) | size: 4 |
Temperature of the pre-disperser prism for reference to the corresponding spectral calibration parameters
unit: "1e-3 K"
converted unit: "K" (multiply by 1/1000)
|
|
27 | FPA_TEMP |
binary array[6] | size: 24 |
FPA temperature, per channel
binary int32 (double) | size: 4 |
unit: "1e-3 K"
converted unit: "K" (multiply by 1/1000)
|
|
|
28 | RAD_TEMP |
binary int32 (double) | size: 4 |
Radiator temperature
unit: "1e-3 K"
converted unit: "K" (multiply by 1/1000)
|
|
29 | INTEGRATION_TIMES |
binary array[10] | size: 40 |
Integration times per band
binary int32 (double) | size: 4 |
unit: "1e-6 s"
converted unit: "s" (multiply by 1/1000000)
|
|
|
30 | POL_SS |
binary array[32] | size: 640 |
Single scattering polarisation values given every 187.5 ms
|
|
31 | POL_M |
binary array[32, 4] | size: 19200 |
Measured polarisation values given every 187.5 ms
binary record "" | size: 150 |
|
|
32 | POL_M_P |
binary array[256] | size: 38400 |
Measured polarisation values given for each PMD readout
binary record "" | size: 150 |
|
|
33 | POL_M_SW |
binary int32 (double) | size: 4 |
Fractional polarisation value for the short-wave PMD region (currently not used, set to zero)
converted unit: "" (multiply by 1/1000000)
|
|
34 | REC_LENGTH |
binary array[10] | size: 20 |
Number of elements per band data record for the 10 bands that follow (n1, n2, ..., n10)
|
bit offset: 8 * (add(./GEO_REC_LENGTH, int(.)) * 99 + 66061)
|
35 | NUM_RECS |
binary array[10] | size: 20 |
Number of band data records for the 10 bands that follow (m1, m2, ..., m10)
|
|
36 | WAVELENGTH_1A |
binary array[dim_0] |
Wavelength for Band 1a
dim_0: int(../REC_LENGTH[0])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
37 | WAVELENGTH_1B |
binary array[dim_0] |
Wavelength for Band 1b
dim_0: int(../REC_LENGTH[1])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
38 | WAVELENGTH_2A |
binary array[dim_0] |
Wavelength for Band 2a
dim_0: int(../REC_LENGTH[2])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
39 | WAVELENGTH_2B |
binary array[dim_0] |
Wavelength for Band 2b
dim_0: int(../REC_LENGTH[3])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
40 | WAVELENGTH_3 |
binary array[dim_0] |
Wavelength for Band 3
dim_0: int(../REC_LENGTH[4])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
41 | WAVELENGTH_4 |
binary array[dim_0] |
Wavelength for Band 4
dim_0: int(../REC_LENGTH[5])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
42 | WAVELENGTH_PP |
binary array[dim_0] |
Wavelength for PMD p
dim_0: int(../REC_LENGTH[6])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
43 | WAVELENGTH_PS |
binary array[dim_0] |
Wavelength for PMD s
dim_0: int(../REC_LENGTH[7])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
44 | WAVELENGTH_SWPP |
binary array[dim_0] |
Wavelength for short wavelength range (block B) PMD p
dim_0: int(../REC_LENGTH[8])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
45 | WAVELENGTH_SWPS |
binary array[dim_0] |
Wavelength for short wavelength range (block B) PMD s
dim_0: int(../REC_LENGTH[9])
binary int32 (double) | size: 4 |
unit: "1e-6 nm"
converted unit: "nm" (multiply by 1/1000000)
|
|
|
46 | BAND_1A |
binary array[dim_0, dim_1] |
Band data record for Band 1a
dim_0: int(../NUM_RECS[0])
dim_1: int(../REC_LENGTH[0])
|
|
47 | BAND_1B |
binary array[dim_0, dim_1] |
Band data record for Band 1b
dim_0: int(../NUM_RECS[1])
dim_1: int(../REC_LENGTH[1])
|
|
48 | BAND_2A |
binary array[dim_0, dim_1] |
Band data record for Band 2a
dim_0: int(../NUM_RECS[2])
dim_1: int(../REC_LENGTH[2])
|
|
49 | BAND_2B |
binary array[dim_0, dim_1] |
Band data record for Band 2b
dim_0: int(../NUM_RECS[3])
dim_1: int(../REC_LENGTH[3])
|
|
50 | BAND_3 |
binary array[dim_0, dim_1] |
Band data record for Band 3
dim_0: int(../NUM_RECS[4])
dim_1: int(../REC_LENGTH[4])
|
|
51 | BAND_4 |
binary array[dim_0, dim_1] |
Band data record for Band 4
dim_0: int(../NUM_RECS[5])
dim_1: int(../REC_LENGTH[5])
|
|
52 | BAND_PP |
binary array[dim_0, dim_1] |
Band data record for PMD p
dim_0: int(../NUM_RECS[6])
dim_1: int(../REC_LENGTH[6])
|
|
53 | BAND_PS |
binary array[dim_0, dim_1] |
Band data record for PMD s
dim_0: int(../NUM_RECS[7])
dim_1: int(../REC_LENGTH[7])
|
|
54 | BAND_SWPP |
binary array[dim_0, dim_1] |
Band data record for short wavelength range (block B) PMD p
dim_0: int(../NUM_RECS[8])
dim_1: int(../REC_LENGTH[8])
|
|
55 | BAND_SWPS |
binary array[dim_0, dim_1] |
Band data record for short wavelength range (block B) PMD s
dim_0: int(../NUM_RECS[9])
dim_1: int(../REC_LENGTH[9])
|
|