| id | field name | definition |
|---|
| 0 | F_NN_DT |
| binary array[6] | size: 6 |
|---|
Flag indicating non-nominal detector temperature, per channel
|
|
| 1 | F_NN_PDP |
| binary uint8 | size: 1 |
|---|
|
Flag indicating non-nominal pre-disperser temperature
|
|
| 2 | F_NN_RAD |
| binary uint8 | size: 1 |
|---|
|
Flag indicating non-nominal radiator temperature
|
|
| 3 | F_NN_WLS_U |
| binary uint8 | size: 1 |
|---|
|
Flag indicating non-nominal WLS voltage
|
|
| 4 | F_NN_WLS_I |
| binary uint8 | size: 1 |
|---|
|
Flag indicating non-nominal WLS current
|
|
| 5 | F_NN_SLS_U |
| binary uint8 | size: 1 |
|---|
|
Flag indicating non-nominal SLS voltage
|
|
| 6 | F_NN_SLS_I |
| binary uint8 | size: 1 |
|---|
|
Flag indicating non-nominal SLS current
|
|
| 7 | F_INV_UTC |
| binary uint8 | size: 1 |
|---|
|
Flag indicating invalid UTC
|
|
| 8 | F_MISS |
| binary uint8 | size: 1 |
|---|
|
Flag indicating missing data packets
|
|
| 9 | F_SAT |
| binary array[10] | size: 10 |
|---|
Flag indicating saturated pixels, per band
|
|
| 10 | F_HOT |
| binary array[10] | size: 10 |
|---|
Flag indicating hot pixels, per band
|
|
| 11 | F_SAA |
| binary uint8 | size: 1 |
|---|
|
Flag indicating whether scan is in SAA
|
|
| 12 | F_SUNGLINT |
| binary uint8 | size: 1 |
|---|
|
Flag indicating danger of sun-glint (0 = no risk, 1 = low risk, 2 = high risk)
|
|
| 13 | F_RAINBOW |
| binary uint8 | size: 1 |
|---|
|
Flag indicating danger of rainbow
|
|
| 14 | F_MODE_GEOLOCATION |
| binary uint8 | size: 1 |
|---|
|
Flag indicating possible mismatch between observation mode and geolocation
|
|
| 15 | F_MIN |
| binary array[10] | size: 10 |
|---|
Flag indicating that mean raw signal is below a specified threshold, per band
|
|
| 16 | MEAN_UC |
| binary array[10] | size: 40 |
|---|
Mean raw signal per band
| binary int32 (double) | size: 4 |
|---|
|
converted unit: "" (multiply by 1/1000)
|
|
|
| 17 | F_OLD_CAL_DATA |
| binary uint8 | size: 1 |
|---|
|
Flag to indicate that old in-flight auxiliary calibration data is in use (0 = no in-flight auxiliary calibration data is old, 1 = dark signal correction old, 2 = PPG correction old, 4 = spectral calibration parameters old, 8 = etalon correction old, 16 = SMR old)
|
|